Chapter 919 Lathe process innovation
On the morning of December 10th in the fourth year of Tianxuan, Qu Mao spent the whole morning chatting with Minister of Education Kong Fu in the living room on the first floor of the lord's hut, although many of Kong Fu's plans and suggestions made Qu Mao feel uncomfortable.
But after thinking about it carefully, Qu Mao thinks it should be like this, which shows that at least the Minister of Education of the Yicheng Territory did not blindly follow his own requirements, but had his own ideas. Is the effect to be achieved?
Wanting to understand this, Qu Mao and Kong Fu communicated for a whole morning, and stayed with Kong Fu to have lunch together in the lord's hut. During the lunch, the two even discussed whether to go to the main mainland in the eighth year of Tianxuan A university is opened in Tassel Principality.
When the discussion got to the point where he was happy, Qu Mao even felt that it was not necessary to wait until the eighth year of Tianxuan before going to the Duchy of Liusu to open a university, and it could be earlier.
After all, the rapid construction of the education system in Yicheng territory has inherited and received many achievements of the former king of the Tassel Principality—that is, Su Yan’s late father—in the implementation of national education in the Principality of Tassels. Su Yan's father had promoted universal education in Liusu Principality for ten years, but unfortunately he was usurped by the king of Liuwang Principality before he could enjoy the results. In the end, these achievements were basically cheap for Qu Mao.
Bringing the achievements of national education that the Tassel Principality had implemented for ten years before the country was destroyed, Qu Mao and Kong Ming directly piled up 36 universities in the Holy Land of Yihou Territory.
At noon on December 10, the fourth year of Tianxuan, Qu Mao had just sent Kong Fu away when the magic communication crystal in his pocket suddenly vibrated. He took out the magic communication crystal and saw that it was a remote communication application sent by Kong Ming.
Connected to the remote communication, Qu Mao asked: "Kong Ming, what do you want from me?"
Kong Ming said: "My lord, I would like to ask you to move to the Lidao Power Research Institute."
Qu Mao was silent for a while in astonishment, and asked: "Damn! Kong Ming, what's the matter? It's so mysterious, didn't we meet in the lord's cabin yesterday?
A few days ago, the two of us spent several days wandering around the four southern islands. What the **** happened? You actually asked me to go to outlying islands. "
Kong Ming smiled and said, "My lord, do you still remember some ideas we had at the Liandao Lathe Factory?"
A flash of light flashed in Qu Mao's mind, and he said, "Damn! Impossible, isn't it? Kong Ming, did you produce results so quickly for some of the innovations in lathe technology mentioned at that time?"
Kong Ming laughed loudly and said: "My lord, the first lathe was made near the Liandao Power Research Institute. Although many workers were hired by Liandao after the establishment of the Liandao Lathe Factory, it is hard to leave the homeland. A large number of skilled blacksmiths and carpenters who are familiar with the spare parts of the lathe factory live in the surrounding area.
After returning to outlying islands from Yi Island yesterday afternoon, the subordinates stayed up all night, plus this morning, isn't it normal to come up with a sample? "
Qu Mao smiled and said, "Stop blowing it up, I'll come over right away and see what kind of samples you have to make."
Immediately, Qu Mao went to the backyard of the lord's hut to get the horses, ordered 20 fifth-tier palace guards, flattered the horses and rushed towards the outlying island power research institute.
An hour later, Qu Mao appeared in front of Kong Ming, and without being polite to Kong Ming, he said directly: "Kong Ming, where is your sample? Quickly show it to me."
But soon Qu Mao stopped talking, because there was a brand new lathe in the middle of the blacksmith shop. At first glance, the whole lathe was not much different from the previous lathes. Qu Mao even wondered whether Kong Ming had copied one. The original version of the lathe.
Soon Qu Mao discovered that the difference between this lathe and the previous ones lies in the position of the turning tool. There are not only one pair of turning tools on both sides, but three pairs. The distance between the three pairs of turning tools is not far from each other, and the three pairs of turning tools The distance between the turning tools is not consistent.
A log with a diameter of about 10 cm was pushed into the feed port by the on-site personnel, and then two on-site workers began to shake the crank shaft to drive the turning tool to rotate.
Qu Mao immediately waved his hand to stop, and said: "Stop for a moment, the turning tool is moving instead of the raw material, so the risk factor is very high, Kong Ming, is there a way to change the feeding method to automatic raw material movement?"
Kong Ming said: "Of course, but during the test, the rotation of the turning tool can facilitate us to quickly test the impact of the turning tool on the raw materials. Sir, you can take a look at the effect of this car first. When the mass production is formally finalized, the subordinates will definitely Transform the drive form."
As the experiment progressed, it turned out that three pairs of turning tools acted on the log respectively, rotating around the log at high speed. After the sawdust flew horizontally, the log that was originally straight through became a wooden pillar of different thickness.
Qu Mao reached out and touched the wooden beads behind the car, and said, "Kong Ming, you really have a way. But you can try my suggestion just now.
I always feel that you now use three pairs of turning tools to rotate around the raw material, which consumes more energy and has higher risks. Once the turning tools break off, it will pose a great threat to the operator.
In addition, it is easy to cause the rotation speed of the turning tool to be different due to the inconsistent rotation speed of the crankshafts on both sides, which will damage the raw materials and reduce the yield.
If the turning tool is fixed, the risk just mentioned may also exist, but it can be minimized. "
Kong Ming took out a pen and paper, and said, "My lord, you are an expert in this aspect, and your subordinates will record it first.
However, the test of this sample is enough to show that the lathes you discussed with your subordinates at the Liandao Lathe Factory to produce products with more complex specifications are achievable. Now the application scenarios of lathes are mainly arrow shafts and crossbow bolts, or long guns. Round wooden parts such as gun handles.
After this technological innovation, almost all wooden parts can be produced by lathes in the future. "
Qu Maodao: "Yes, at that time we were discussing to solve this problem. I think that since the sample has been successfully trial-produced, we can go to Gandao, Bodao and Ludao to build another lathe factory, mainly to innovate with new technology. The lathe production mainly.
Of course the technology should also be passed on to Liandao Lathe Factory, Kong Ming, you can contact Meng De to handle this matter with you. "
Kong Ming smiled and said: "Yes, my lord!
Meng De coveted the Liandao lathe factory for a long time. Building a lathe factory on Gandao, Bodao and Green Island can also ease the conflict between Mengde and Xuande. "
Qu Mao said: "The Liandao Lathe Factory still belongs to the Ministry of Industry after all, so Xuande's logistics department shouldn't join in the fun, it's nothing more than investing more start-up funds in the lord's cottage.
Finish it as soon as possible, Kong Ming, I request that the lathe factory be built as soon as possible. "
(end of this chapter)